Chapter 4 Connecting computers and other devices
smarttech.com/kb/171862 102
Connecting a SMART OPS PC module
If your organization has purchased a SMART OPS PC module, you or your
organization’s installers can install the OPS PC module in the display’s
accessory slot following the OPS PC module’s installation instructions
(smarttech.com/kb/171775 or smarttech.com/kb/171544). You can then view
the OPS PC module’s input on the display.
Caution
Do not insert or remove the OPS PC from the accessory slot while the display is turned on.
For more information about SMART OPS PC modules, see the
SMART OPS PC modules user guide
(smarttech.com/kb/171747).
To Next Page
Loading...
