Chapter 2 Using basic features
smarttech.com/kb/171862 55
Using Remote
For mobile devices only.
1. Open the Bytello Share app on your device.
2. Connect to the display using the app.
3.
On your device, tap Remote in the app.
4. Control the display using the touchscreen on your mobile device.
Tip
Tap the More menu to switch between
Motion mode
and
Touchpad mode
.
Device Sync
For PC only.
The Device Sync feature enables you to connect your computer to a camera and microphone connected
(optionally) to the display, creating a virtual camera and microphone. Use this feature for meetings in
third-party conference software.
1. Open the Bytello Share app on your device and connect to the display.
2.
In the app, click Device Sync.
3. Select whether to connect to the camera and microphone.
If a camera is connected to the display, you can see its view on your device’s screen. If you sync the
microphone, you can hear the audio in the room with the display.
Using native streaming (AirPlay, Miracast, or Chromecast)
On networks that are configured to support AirPlay, Miracast, or Chromecast, participants can use
native screen sharing without installing software or worrying about admin rights.
Streaming via AirPlay and Chromecast are enabled by default, but streaming via Miracast must be
enabled in
Settings
(see
Settings
on page41).
To Next Page
Loading...
