Chapter 2 Using basic features
smarttech.com/kb/171862 14
Note
When the display is connected to an external input that has had no active signal for 5 minutes, it
begins a 10 second countdown before it enters Standby mode.
For information about turning off the display, see the
SMARTBoard GX (V2) series interactive displays
installation and maintenance guide
(smarttech.com/kb/171861).
Using the front control panel
The front control panel contains buttons for turning the display on and off, controlling the volume,
freezing and unfreezing the screen, and going to the Home screen.
The front control panel also includes a light that indicates the display’s current power state.
No. Name Procedure
1 Remote control
receiver and
ambient light
sensor
[N/A]
To Next Page
Loading...
