SMART Board GX V2 Series - Connecting USB drives, peripherals, and other devices

Chapter 4 Connecting computers and other devices
smarttech.com/kb/171862 103
Connecting USB drives, peripherals, and other
devices
The display includes two USB 3.2 Gen 1 Type-A receptacles on the front connector panel and two USB
3.2 Gen 1 Type-A receptacles on the side connector panel. You can connect USB drives, peripherals (such
as keyboards), and other devices to the USB 3.2 Gen 1 Type-A receptacles and use these devices with the
display’s embedded OS or OPS slot computer. The display’s USB 3.2 Gen 1 Type-A receptacles will switch
to the active input.