Chapter 2 Using basic features
smarttech.com/kb/171862 57
To use Chromecast to connect from a Chrome browser or Chromebook
1.
From the display’s Home screen, tap Screen Share .
The main Screen Share interface opens.
Note
Make a note of the
ScreenShare
name next to the icon.
2. Verify that your device and display are connected to the same Wi-Fi network (see
Verifying the
network
on page46).
3. Follow the instructions for your computer to use Chromecast (see Chrome support).
Note
With this connection method, other devices can end the screen sharing session without warning.
Connect using Webcast
Participants can connect via the Bytello Share website without downloading and installing apps or
software. Make sure the Screen Share app is configured to allow Miracast connections (see settings).
1.
From the display’s Home screen, tap Screen Share .
The main Screen Share interface opens.
OR
Tap the floatingmenu icon at the top of the Home screen of the display if Screen Share is
running.
2. Verify that your device and display are connected to the same Wi-Fi network (see
Verifying the
network
on page46).
3. On your device, open your preferred browser and enter the URL share.bytello.com.
4. Enter the 6-digit connection code shown on the Screen Share app’s main interface or in the floating
menu at the top of the display.
OR
Tap the display’s name you want to connect to in the
Select a device
section.
5. Wait for the device to automatically connect or for the host to accept your request to join.
You can pause the screen share at any time.
6.
When you’re finished sharing, click the icon or close or refresh the tab.
To Next Page
Loading...
