Chapter 1 Welcome
smarttech.com/kb/171862 12
If you want to use the 86" model (SBID-GX186-V2) with a variety of SMART’s electric height-adjustable
stands, you must first attach a SMART wall mount (model WM-SBID-200, part #1031766,
smarttech.com/kb/171405) to the display before mounting the display to the stand. (This applies to the
FSE-400, FSE-410, and FSE-420 models of mobile stand and the WSE-400 and WSE-410 models of
wall stand).
USB extenders
As noted in the display’s specifications, the USB connection between the display and computer should be
no longer than 16'(5m). If you need to connect a computer that is more than 16' (5 m) from the display,
use the following USB extender:
Extender Specifications
USB-XT smarttech.com/kb/119318
Note
For more information about extending USB connections, see USB cable extenders.
More information
SMART provides a variety of other documents for this display in the Support section of the SMART
website (smarttech.com/support). Scan the QR code on this guide’s cover for links to SMARTBoard GX
(V2) series interactive display documents and other support resources.
To Next Page
Loading...
