SMART Board GX V2 Series - Connecting Your Device to the Display; Verifying the Network

Chapter 2 Using basic features
smarttech.com/kb/171862 46
Expand the sections below to learn more about each step.
Verifying the network
Your device must be on the same network as the display to connect using the Bytello Share App or native
streaming from devices (Airplay, Miracast, and Chromecast). Use the following procedure to verify that
your device and the display are connected to the same network.
1.
From the display’s Home screen, tap Screen Share .
The main Screen Share interface opens.
OR
Tap the floatingmenu icon at the top of the Home screen of the display if Screen Share
is running.
2.
Make a note of the network the display is connected to. The name appears beside the icon.
3. Verify that your device is connected to the same network. Consult your device’s user guide for more
information.
Connecting your device to the display
1.
From the display’s Home screen, tap Screen Share .
The main Screen Share interface opens.
2. Verify that your device and display are connected to the same Wi-Fi network (see Verifying the
network above).
Notes
o
If you’re using the Bytello Share app, make a note of the 6-digit connection code.
o
If you’re using a method other than the Bytello Share app (such as AirPlay, Chromecast, or
Miracast), make a note of the ScreenShare name next to the icon.