SMART Board GX V2 Series - Device Requirements for Using Bytello Share; Downloading and Using the Bytello Share App; Using the Bytello Share App

Chapter 2 Using basic features
smarttech.com/kb/171862 51
Using the Bytello Share app
For the best performance, use the Bytello share app to connect your device to the display.
Device requirements for using Bytello Share
Device Requirement
iOS devices (iPhone 6 or later) iOS 10.0 and later
Android devices Android 5.0 and later (Android 10.0 recommended)
Windows computers Windows 7, 8, 10 and later
Mac computers Mac OS X 10.11, 11 and later
Chrome browser Chrome 38 and later
Linux Ubuntu 12.04 and later
Downloading and using the Bytello Share app
You can use the Bytello Share app to mirror your device, sync with the display, share files, and more.
Begin by downloading and installing the app on your device. For device requirements, see Device
requirements for using Bytello Share above.
To download the Bytello Share app
1.
From the display’s Home screen, tap Screen Share .
The main Screen Share interface opens.
2.
Tap the User Guide icon .
3. In your device’s browser, enter the URL specified on the display’s screen in the Install section
(https://ssp.bytello.com/download).
OR
Use a QR code scanning app on your device to scan the QRcode on the display’s screen.
4. Download and install the Bytello Share app for your device.
To connect your device to the display
1. Verify that your device and display are connected to the same Wi-Fi network (see Verifying the
network on page46).
2. Open the Bytello Share app on your computer or mobile device.