Chapter 2 Using basic features
smarttech.com/kb/171862 54
To use Desktop Sync
1. Open the Bytello Share app on your device and connect to the display.
2.
On your device, tap Desktop Sync.
Note
o
For security purposes, touchback is automatically disabled, but you can enable it from the
Device management
page of the display’s Screen Share app (see
Managing connected
devices
on page47).
o
Touchback is available only on the maximized screen/docked screen.
3. Wait for your host to accept the request to sync your device’s desktop to the display. The display’s
screen appears on your device.
In Desktop Sync mode, users can write on the display at the display itself and from the connected
devices (if permissions are enabled). You can take a screen capture of the annotations and share the file
with devices connected with the Bytello Share app.
To annotate
1.
Make sure your device is in Desktop Sync mode.
2.
From the floating menu on the display, tap the icon to open the annotation toolbar.
Tool Icon Description
Pen Touch behaves like a pen, drawing digital ink on the screen overlay.
Tap the pen icon to change color. Use the pen feature to annotate
over the screen sharing session.Devices with Touchback
permissions enabled can also make annotations.
Erase Touch behaves like an eraser, erasing digital ink drawn on the
screen overlay.
Clean Clears all of the annotations.
Save Save the current screen to an image file on the display.
Insert Insert an annotated screen capture into a whiteboard file on the
display.
Share Share annotations with devices that are connected with the Bytello
Share app in Desktop Sync mode. Tap Share, select the device, and
tap Confirm. The display sends a screen capture in .png format.
To Next Page
Loading...
