Chapter 1 Welcome
smarttech.com/kb/171862 8
Mounting hardware
You can use VESA compliant wall mounts, such as SMART’s WM-SBID-200 wall mount (not included), to
mount the display on a wall.
You can also mount the display on a mobile stand (see
Accessories
on page11).
Front control panel
The front control panel provides buttons for turning the display on and off, controlling the volume,
freezing the screen, and displaying the Home screen.
For more information about the front control panel, see
Using the front control panel
on page14.
Remote control and infrared sensor
The display’s infrared sensor is located in the control panel in the bottom-right corner of the display’s
frame.
You can use the remote control to turn the display on and off, adjust display settings, and so on.
For more information, see
Using the remote control
on page15.
Ambient light sensor
The ambient light sensor is located in the bottom-right corner of the display’s frame. The sensor detects
the brightness of the room and adjusts the screen’s brightness accordingly.
To enabled or disabled this feature, go to Input > Advanced settings > Screen > AutoLight.
See the
SMARTBoard GX (V2) series interactive displays installation and maintenance guide
(smarttech.com/kb/171861).
Power status
The power status indicator light is located in the Power button in bottom-right of the display’s frame.
For more information, see
Using the front control panel
on page14.
Writing, drawing, and erasing
The display comes with two pens you can use to write or draw on the screen. Each end of a pen can be
assigned to write or draw in a different color when using the Whiteboard app. You can erase digital ink
by moving your fist or palm over the digital ink.
To Next Page
Loading...
