Smart Friends Box - Page 39

39
Installation instructions
A2.3
Smartvest Motion Detector: The following conditions can be
used as a trigger in the IF section of the scene:
A2.4
Smartvest Smoke Detector: The following conditions can be
used as a trigger in the IF section of the scene:
Smoke detector:
Fire, No re
Failure: No, Low battery,
No signal
Note: No conditions can be
used as an actuator in the
THEN section of the scene:
A2.5
Smartvest Socket: The following conditions can be
used as a trigger in the IF section of the scene:
Smartvest Socket: The following conditions can be used
as an actuator in the THEN section of the scene:
Switch: On, Off
Failure: No, No signal
Switch: On, Off
Motion detector:
Movement, No movement
Failure: No, Low battery,
No signal
Note: No conditions can be
used as an actuator in the
THEN section of the scene: