111 | CHAPTER 19 – THE SMART NOTEBOOK CONTROL PANEL
10. Repeat steps 5 through 9 if you want to customize other pens (on interactive
whiteboards) or pen tool buttons (on interactive pen displays).
11. Press OK to close the control panel.
Changing Eraser Settings
You can change SMART hardware settings to customize the behavior of your SMART
product, including the size of the eraser.
To change Eraser Settings 1. Open the SMART Notebook control panel.
2. Press SMART Hardware Settings.
The upper area of the control panel displays an image of the SMART product
connected to the computer.
3. If your computer is connected to more than one SMART product, the upper area
of the control panel displays an image of each SMART product. Press the image
of the product with the settings you want to change.
4. Select Pen and Button Settings in the list.
5. Press Eraser Settings .
6. Select an eraser size.
7. Press OK to save your settings.
8. Press OK to close the control panel.
Changing Button Settings
If you're using an interactive whiteboard, you can change the settings of the two pen
tray buttons. If you're using an interactive pen display, you can change the settings of
some pen tool and function buttons.
To change the
button settings
1. Open the SMART Notebook control panel.
2. Press SMART Hardware Settings.
The upper area of the control panel displays an image of the SMART product
connected to the computer.
To Next Page
Loading...