112 | CHAPTER 19 – THE SMART NOTEBOOK CONTROL PANEL
3. If your computer is connected to more than one SMART product, the upper area
of the control panel displays an image of each SMART product. Press the image
of the product with the settings you want to change.
4. Select Pen and Button Settings in the list.
5. Press Button Settings .
6. Select settings for each button that you can customize on your interactive product.
7. Press OK to save your settings.
8. Press OK to close the control panel.
Changing the Orientation Level
You must configure and align SMART Notebook to respond accurately when you
press the interactive screen. You can provide this information by performing an
orientation: a simple process of pressing firmly and precisely on a target displayed on
the screen.
You can change SMART hardware settings to customize the behavior of your SMART
product, including the precision of the orientation procedure. If you're using a program
that requires precise control, you can select a precise orientation. However, if you
want to configure the screen as quickly as possible, you can select a quicker
orientation process.
To change the
orientation level
1. Open the SMART Notebook control panel.
2. Press SMART Hardware Settings.
The upper area of the control panel displays an image of the SMART product
connected to the computer.
3. If your computer is connected to more than one SMART product, the upper area
of the control panel displays an image of each SMART product. Press the image
of the product with the settings you want to change.
4. Select Orientation/Alignment Settings in the list.
5. Select the orientation precision level you want.
–The Quick orientation uses four alignment points and is suitable for most
purposes. You can perform a Quick orientation to re-orient the interactive
product with minimal interruption.
To Next Page
Loading...