114 | CHAPTER 19 – THE SMART NOTEBOOK CONTROL PANEL
5. Move the slider to change the size of the double-click zone.
6. Press OK to close the control panel.
Enabling Touch and Hold to Open the Right-Click Menu
You can change SMART Notebook settings so that pressing and holding the
interactive screen opens the right-click menu.
To enable Touch and Hold 1. Open the SMART Notebook control panel.
2. Press SMART Hardware Settings.
The upper area of the control panel displays an image of the SMART product
connected to the computer.
3. If your computer is connected to more than one SMART product, the upper area
of the control panel displays an image of each SMART product. Press the image
of the product with the settings you want to change.
4. Select Mouse Settings in the list.
5. Select Enable Touch and Hold.
6. Press OK to close the control panel.
Disabling Pop-Up Messages
You can disable pop-up messages, such as the right-click and the Restore Writing
messages.
To disable
pop-up messages
1. Open the SMART Notebook control panel.
2. Press SMART Hardware Settings.
The upper area of the control panel displays an image of the SMART product
connected to the computer.
3. If your computer is connected to more than one SMART product, the upper area
of the control panel displays an image of each SMART product. Press the image
of the product with the settings you want to change.
4. Select Mouse Settings in the list.
5. Clear the Enable Pop-Up Messages check box.
6. Press OK to close the control panel.
To Next Page
Loading...