125 | CHAPTER 19 – THE SMART NOTEBOOK CONTROL PANEL
The upper area of the control panel displays an image for each SMART product
connected to the computer.
3. Select the product you want to orient.
4. Press Orient.
NOTE
Sometimes, the orientation screen appears on the interactive screen for your
primary SMART product instead of the interactive screen you want to orient. If
this happens, press SPACEBAR until the orientation screen appears on the
interactive screen you want to orient.
5. Touch the center of each target in the order indicated. The computer registers the
point on the interactive whiteboard where you remove your finger or the pen tool
from the screen surface.
The orientation procedure involves pressing 4, 9, 12 or 20 targets, depending on
the orientation level you select.
Changing the Language Settings
You can switch the language of the SMART Notebook interface if your language
requirements change.
If the language you want doesn't appear in the list, you may be able to install
additional language files, and then switch SMART Notebook to this language.
To change languages 1. Open the SMART Notebook control panel.
2. Press Language Settings.
The Language Setup dialog box appears.
3. Select All Listed Applications to change the language for all the programs in the
list.
OR
Select a program in the list to change the language for this program only.
4. Select a language in the list.
5. Press OK.
To Next Page
Loading...