SMART Notebook 10 - Changing the Axis of Your SMART Product

117 | CHAPTER 19 – THE SMART NOTEBOOK CONTROL PANEL
5. Select the number of Columns and Rows you want to use in the video output
arrangement.
6. Orient each interactive product.
Changing the Axis of Your SMART
Product
If your SMART product uses DViT™ (Digital Vision Touch) technology, you can edit
SMART hardware settings to change its axis. When you change the axis, the
orientation of the interactive screen changes from horizontal (landscape) to vertical
(portrait) mode and vice versa.
IMPORTANT
Change the product's advanced settings only if asked to do so by SMART
Technical Support.
NOTE
You may also need screen-rotation software to rotate the portrait image so that it
fits correctly on the display.
To change the axis of
your SMART product
1. Open the SMART Notebook control panel.
2. Press SMART Hardware Settings.
The upper area of the control panel displays an image of the SMART product
connected to the computer.
3. If your computer is connected to more than one SMART product, the upper area
of the control panel displays an image of each SMART product. Press the image
of the product with the settings you want to change.
4. Select Advanced Settings in the list.
5. Select an axis setting in the Board Axis Settings area.
6. Press OK to close the control panel.