128 | CHAPTER 20 – TROUBLESHOOTING
Exiting SMART Tools
You can disable SMART tools and continue to use your SMART product's
touch-sensitivity features.
NOTE
Don't exit SMART tools unless you want to disable them. You don't need to exit
SMART tools if you want to use other software on your computer.
To exit SMART tools
Press the SMART Board icon in the system tray, and then select Exit.
Activating SMART Notebook for
Third-Party Devices
If you want to use SMART Notebook with a third-party touch- or pen-enabled device,
you must first activate the software by purchasing a Competitive Product Software
License. Without this license, SMART tools don't work when the computer isn't
connected to a SMART product. When you order a Competitive Product Software
License, you receive a product key that activates SMART Notebook.
NOTE
For more information, open the SMART Notebook control panel, press About
Software and Product Support, and then press Legal.
To activate
SMART Notebook for
third-party devices
1. Open the Welcome Center.
2. Press the Help/Support tab.
3. Press Activate Software.
The SMART Software Activation dialog box appears.
4. Follow the on-screen instructions.
To Next Page
Loading...