SMC Networks HEC002-A5 - 2.2 Warning label and Caution label

Safety Instructions
HEC002-A/HEC006-A 2-3
2.2 “Warning” label and “Caution” label
This product is provided with “Warning” labels and “Caution” labels to inform the operator of hazards
related to the product. Check the contents and position of all labels before starting the work.
The product shall be handled only by trained personnel only.
Transportation, installation and maintenance including dangerous work
shall be done by persons who have full knowledge and experience on
the product and the system. Cover panels of the product shall be
opened only by qualified service technicians or qualified personnel.
Read all warning and caution labels carefully and keep them in mind. Do
not peel off or rub alert warning and caution labels.
Confirm locations of alert warning and caution labels.
This product cannot be used for the device related to food.
If abnormal conditions, such as abnormal noise or smoke, or water
leakage appeared, take the following actions:
Shut down power.
Stop water radiating water supply
Contact an authorised SMC dealer for repair
2.2.1 The position of attached “Warning” label and “Caution” label
Fig. 2-1 The position of attaching “Warning”
label and “Caution” label
“Caution” label and “Warning” label
60mm
150mm
Fig.2-2 Detail of “Warning” and “Caution” label
for HEC002-A
for HEC006-A