SMC Networks HRS018-A 20 R Series - Page 115

HRX-OM-W058
Chapter 5 Display and setting of various functions
HRS-R Series 5.19 Communication function
5-57
18. Select BCC (simple communication protocol) from the table below with [▲] key or [▼]
key, and confirm by pressing “SEL”.
Table 5.19-10 List of set value
Set value
Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
serial protocol setting is simple
communication protocol.
No BCC
With BCC
○
Data length (simple communication protocol) Setting and checking
19. Press the [SEL] key once.
The set screen of data length (simple communication protocol) is displayed on the digital
display.
20. Select data length (simple communication protocol) from the table below with [▲] key or
[▼] key, and confirm by pressing “SEL”.
Table 5.19-11 List of set value
Set value
Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
serial protocol setting is simple
communication protocol.
7 7 bit
8 bit
○
Parity check (simple communication protocol) Setting and checking
21. Press the [SEL] key once.
The set screen of parity check (simple communication protocol) is displayed on the
digital display.
PV
SV
PV
SV