SMC Networks HRS018-A 20 R Series - Page 144

HRX-OM-W058
Chapter 8 Control, Inspection and Cleaning
8.4 Stop for a Long Time HRS-R Series
8-8
4. Confirm that a sufficient amount of the circulating fluid has been drained from the user’s
machine and piping, and apply air purge from the circulating fluid return port.
5. After discharging the circulating fluid in the tank, refit the drain plug, clip and close the
tank lid.
Circulating fluid
outlet (Rc1/2)
Plug
ラグ
Circulating fluid
return port (Rc1/2)