HRX-OM-O021
Chapter 1 Safety Instructions
HRS Series 1.3 Hazards
1-3
1.3.3 Types of hazard labels
The product has various potential hazards and they are marked with
warning labels. Be sure to read this section before starting any work on the
product.
Warning related to electricity
Warning related to high temperatures
Warning related to rotating objects
Warning related to other general dangers
This symbol stands for a possible risk of cutting fingers or hand, or
entanglement by rotating fan (For air-cooled type).
The product contains a cooling fan that rotates during operation of the
product.
The fan can start and stop intermittently and without warning.
z DO NOT operate the product without cover panels fitted.
This symbol stands for a possible risk of hot surface and burns.
The product has surfaces that can reach high temperatures during
operation. Even after the power is turned off, there can still be residual
heat in the product.
z DO NOT operate the product without cover panels fitted.
z DO NOT start working inside the product until the temperature has
decreased sufficiently.
This symbol stands for a possible risk of electric shock.
The product is operated at high voltage and contains uncovered live
terminals inside.
z DO NOT operate the product without cover panels fitted.
DO NOT work inside this product unless you have been trained to do
so.
This symbol stands for general danger.
Hazards Inside
Hot Surfaces Inside – See Hot Surface symbol
Rotating Fan Inside – See Rotating Fan symbol (For air-cooled type)
Pressurized Sytem Inside – The product contains pressurised fluid
systems.
z DO NOT operate the product without cover panels fitted.
To Next Page
Loading...
Need help?
General
