SMC Networks HRS050-A*-20 Series User Manual

HRX-OM-O021
Chapter 5 Display and setting of various functions
5.15 Alarm customize function HRS Series
5-46
38. Select the changing of electric resistivity dropfrom the table below with [▲] key or [▼]
key, and confirm by pressing “SEL”.
Table 5.15-20 List of set value
Set value Explanation
Initial value
(Default setting)
Setting/checking are not available if the
setting of the DI option is OFF.
This alarm signal is not detected.
○
Operation continues when this alarm signal is
generated.
Changing of lower limit of electric resistivity drop Setting and checking
39. Press the [SEL] key once.
The set screen of the changing of lower limit of electric resistivity drop is displayed on
the digital display.
PV
SV
40. Select the changing of lower limit of electric resistivity drop from the table below with
[▲] key or [▼] key, and confirm by pressing “SEL”.
Table 5.15-21 List of set value
Set value Explanation
Initial value
(Default setting)
Setting/checking are not available if the
setting of the DI option is OFF and changing
of lower limit of electric resistivity drop is OFF.
to
Sets lower limit of electric resistivity drop.
Set unit is 0.1MΩ･cm unit.
How to monitor the temperature alarm Setting and Checking
41. Press the [SEL] key once.
Setting screen of the temperature alarm monitoring method is displayed on the digital
display.
PV
SV

SMC Networks HRS050-A*-20 Series Specifications

General

Brand	SMC Networks
Model	HRS050-A*-20 Series
Category	Chiller
Language	English