SMC Networks mentor 12 User Manual

MENTOR 12 US SECTION 4 CONFIGURATION – Page 104 ER’S MANUAL
movements of the touch panel with respect to the screen or very large
changes in the room temperature from one working place to another, it may
be necessary to readjust the touch panel. This operation is quick and simple
and is done by pressing the “Calibrate” button, which takes you to some
windows that show you the steps you have to carry out. Follow the
instructions given in each step and you will calibrate your touch panel
correctly.
It is advisable to use a fine plastic stylus to increase the accuracy.
You can repeat the process as often as necessary until the touch panel is
calibrated to your liking. The calibration you carry out will be the default
configuration when the equipment starts up again.
• Advanced options: This is the access window to different maintenance,
software upgrading and operation options. You must enter a User Name and
a Password, by pressing on the respective windows, using the keypad. Press
“ENTER” to access these options, which are explained in detail in the “Basic
Maintenance” section of this Manual.

SMC Networks mentor 12 Specifications

General

Brand	SMC Networks
Model	mentor 12
Category	Test Equipment
Language	English