Users Guide
11
SAFE USE OF THE EQUIPMENT
Before using the equipment, you must carefully read this manual, especially this section,
which refers to the safety precautions that must be observed.
Symbols used
Danger – It identifies actions and situations that represent
risks to the user.
Caution –
It identifies actions and situations that could cause
damage to the equipment.
Important –
It identifies actions and situations in which special
to correctly conduct a test or take a
measurement.
Dangerous Situations
Danger –
Before changing the power connections or the
power supply, be sure that the system is turned off (by
deactivating the power switch of each unit).
Danger – After inje
cting high current, the cables and
connections could be very hot and could cause burns.
Danger – Do not manually open a circuit through which
current is flowing, given that high voltages could be
generated.
Danger – Never connect the power supply cables to a line
before connecting to the equipment.
To Next Page
Loading...
