Raptor
8
DECLARATION OF CONFORMITY
For the Raptor system. Applicable to all elements comprised in the system.
Raptor MS / Raptor SL / Raptor HH
Manufacturer
EuroSMC, S.A.
Pol. Industrial P-29 C/Buril, 69
28400 Collado Villalba
Madrid – Spain
Declaration of Conformity
Based on the results of the testing conducted according to adequate standards, the
product complies with the following:
• Directive 2004/108/CE relating to Electromagnetic Compatibility.
• Directive 2006/95/CE relating to Low Voltage.
Standards applied
EN 61010.1 (2010) Safety requirements for electrical equipment for
measurement, control and laboratory use.
EN 50081-1 (1994) Electromagnetic compatibility. Generic emissions standard:
EN 55022 and EN 60555-2.
EN 50082-2 (1996) Electromagnetic compatibility. Generic immunity standard:
IEC 1000-4 -2, -3, -4, -5
Testing has been conducted with a typical configuration. This conformity is indicated by
the CE symbol, which means ‘European Conformity’.
To Next Page
Loading...
