SMC Networks raptor

To Next Page

To Previous Page

Users Guide

2 Infrared communications port

6 Hole for pass-through turn

7 Expansion panel

Front Front part of the equipment Phase

reference for the pass-through turn.

Front

Main Page

Limited Warranty3
- Transport Conditions3
- How to Activate this Warranty3
Table of Contents5
Declaration of Conformity8
- Manufacturer8
- Standards Applied8
Elements Comprised in the System9
Safe Use of the Equipment11
- Dangerous Situations11
- Hazardous Situations for the Raptor System12
Introduction13
Location of Elements14
- Raptor-MS (Control Panel)16
- Raptor-MS (Expansion Panel)17
- Raptor-SL (Control Panel)18
- Raptor-HH19
How to Connect the System20
- Positioning of the Equipment20
- Make the Connections21
Turning on the System22
An Initial View of the Console24
- The Status Leds24
- Main Touch Screen25
Making the First Current Injection30
- Steps to Follow31
Available Measurements34
- Internal Measurements34
- Hardware Measurements34
- Calculated Measurements37
- Functions Related to Measurement38
Obtaining the Test Reports39
- Concept of Report and Test39
- How to Use the Reports and Tests39
- Using the Raptorsync Programme (for PC with Windows)40
Other Possible Injections47
Anticipating the Current that will be Obtained48
- Data Entry48
- The Results of the Calculation49
Management of the Pre-Designed Templates51
- Template Management51
- Description of Factory Templates52
Special Functions78
- Recloser78
- CT Magnetisation80
I Need more Current, Voltage or Power83
- Maximum Output Voltage of the System83
- Minimum Load Impedance84
  - Distance to Burden84
  - Parasitic Inductance85
Configuration and Maintenance87
- Configuration87
- Keep the System Up-To-Date90
Problems that Might Arise93
Specifications94
- Raptor-MS94
- Raptor-SL96
- Raptor-HH97
- Ordering Information98

SMC Networks raptor

Table of Contents

Related product manuals