A
BOUT
THE
T
IGER
S
WITCH
1-6
Power Supply Sockets
There is one standard power socket on the rear panel of each switch for the
AC power cord.
Figure 1-4 Power Supply Sockets
Features and Benefits
Connectivity
• 24 10/100BASE-T ports plus 2 Gigabit combination ports (RJ-45/SFP)
and 2 Gigabit 1000BASE-T ports.
• Auto-negotiation enables each RJ-45 port to automatically select the
optimum speed (10 or 100 Mbps), and the communication mode (half or
full duplex) if this feature is supported by the attached device; otherwise
the port can be configured manually.
• Independent RJ-45 10/100BASE-T ports with auto MDI/MDI-X
pinout selection.
• Unshielded (UTP) cable supported on all RJ-45 ports: Category 3, 4 or 5
for 10 Mbps connections, Category 5 for 100 Mbps connections, and
Category 5 or better for 1000 Mbps connections.
• IEEE 802.3-2005 Ethernet, Fast Ethernet, Gigabit Ethernet compliance
ensures compatibility with standards-based hubs, network cards and
switches from any vendor.
RATING
100~240V-
3A 50~60HZ
Power Socket Console Port
To Next Page
Loading...
Need help?
General
