87/282
ENGLISH
Use and maintenance manual ßP700
Among the maintenance checks and operations of general nature there are:
• Lubrication
• Cleaning
• Checks of the warning and signalling devices
• Checks of safety and emergency devices
TENSIONING RODS CLEAN THE ROLLERS OF THE TENSIONING RODS
MAKE SURE THAT THE TENSIONING RODS ARE
MOVING CORRECTLY
Tab. 7.1.4
HALF-YEAR MAINTENANCE CHART (1500 HOURS OF WORKING)
SEALING UNIT
CHANGE THE SEALING BLADE
CHECK THE WEARING STATE OF THE SILICON
RUBBER
CHECK THE SPRINGS OF THE SEALING BAR
CHECK THE SPRINGS OF THE SEALING CONTRAST
CLEAN AND GREASE THE GUIDES
CHECK THE SENSORS
MAKE SURE THAT THE PNEUMATIC PARTS ARE
WORKING CORRECTLY
BELT UNIT
MAKE SURE THAT THE BELT IS WORKING
CORRECTLY
CHECK FOR ANOMALOUS NOISES
REPLACE POSSIBLE DAMAGED PARTS
PUSHER DEVICE
UNIT
MAKE SURE THAT THE PUSHER DEVICE IS SLIDING
PERFECTLY
CHECK THE PNEUMATIC PARTS
Tab. 7.1.3
To Next Page
Loading...
