How to ensure safety
A
Warning!
Ensure that the HI-SCAN X-ray unit is regularly serviced and checked for electrical safety by a quali-
fied service technician! 90
A
Warning!
If there are damages on housing parts, cables, conveyors or lead curtains of the HI-SCAN X-ray unit
you have to stop operation! 100
A
Warning!
Inside the X-ray unit there are no parts to be operated or serviced by the user! Screwed covers and
parts of the housing may only be removed by a qualified service technician!
The same applies to covers bearing the label illustrated even if
such covers can be opened by means of a key!
110
A
Caution!
Ensure that the HI-SCAN X-ray unit is supervised as long as it is switched on! 120
R
Warning!
The HI-SCAN X-ray unit exclusively serves the purpose of X-raying movable items! You must not in-
spect human beings or live animals! 130
A
Warning!
Do not sit on the operator rest* of the X-ray unit! Keep your feet in contact with the ground! 140
A
Warning!
To be able to adhere to the following instructions it is indispensable that you are able to see the con-
veyor's entry and exit! If this is not possible, arrange for appropriate measures to be taken, e.g. cor-
dons, video surveillance or further operating personnel to ensure that the following regulations are
nevertheless observed! 150
A
Warning!
While the X-ray unit is activated ensure that nobody sits or stands on the conveyors or touches mov-
ing parts! 160
95587412 01/01/09 © Smiths Heimann
1-6
To Next Page
Loading...