SMORACY BEAST 3680 - Page 24

Copyright 12/14 22 S/N XXXX WO#XXXXXX
Smoracy, LLC
MODEL 3680
AUTO FEED OPTIONS
4) Set the BACKUP TIME Value:
To decrease the setting value press the button.
To increase the setting value press the button.
To save the setting press the button. The set button initiates
the program mode, saves settings, and finalizes the program mode.
down
up
set
INFORMATION DISPLAY
(This information will only be displayed when in run mode, not in program mode.)
1) To display the running hours press the button.
2) To display the engine speed (RPM’s) press the button.
3) To display the Total cumulative hours press the button.
down
up
Tota l
hrs
DISABLING OUTPUTS
Holding the button for 4 seconds disables BOTH outputs.
The unit then alternates between displaying the RPM’s for 9 to 10 seconds and “OFF” for 1 second.
To enable outputs, press either the or the buttons.
NOTE: This feature only works when engine is running.
down
up
set
AUTOFEED SECTION