Scanner - Motorcycle Codes - View / Scan / Save
48
7.4.2 Clear Codes
The diagnostic tool can clear codes from the electronic control module(s). This
selection only displays if the motorcycle supports this feature.
z To clear codes:
1. Select Clear Codes from the Codes Menu.
A confirmation message displays.
2. Make sure any conditions shown on the confirmation message are met, then
select Yes.
A “codes cleared” message displays once the operation is complete.
3. Select Continue to return to the Codes Menu.
Clearing codes erases all temporary ECM information. Make sure no vital
diagnostic information will be lost before clearing codes.
7.4.3 Code Scan
Code Scan is available from the Main System Menu, and when selected it scans
the control modules for codes. The results of the scan are configured into a report
that is accessible and printable using ShopStream Connect™. The report can be
printed, downloaded, attached to an e-mail or other social media app to share with
others. For additional information on using ShopStream Connect, see ShopStream
Connect ™ on page 119.
PRE / POST Scan Importance - As many systems do not turn on the
check engine light or other indicator, performing a code scan before
making any repairs may help in troubleshooting, by identifying possible
unknown issues that may be related to the present symptoms.
Performing pre and post scans also allows you to record in report format
the pre-condition of the vehicle and compare the post scan after work is
complete to confirm the repairs were completed properly.
The Code Scan function and results are dependent upon the vehicle. Not all
vehicles may support this function.
Selecting Code Scan from the Vehicle System menu (Figure 7-9) starts an active
scan of vehicle control modules, and opens the Code Scan results screen
(Figure 7-10).
Figure 7-9 Code Scan
When initially started, progress status is shown at the top indicating the active
scanning progress. Once completed, code results are displayed by system.
The following are displayed as the modules are scanned and are described in the
following sections.
• Code Scan Toolbar
• Total Number of Systems (modules) Analyzed
• List of All the Systems Analyzed with DTCs Totals
To Next Page
Loading...
Need help?
General