Safety Information Safety Message Conventions
vii
Safety Message Conventions
Safety messages are provided to help prevent personal injury and equipment
damage. Safety messages communicate the hazard, hazard avoidance and
possible consequences using three different type styles:
• Normal type states the hazard.
• Bold type states how to avoid the hazard.
• Italic type states the possible consequences of not avoiding the hazard.
An icon, when present, gives a graphical description of the potential hazard.
Safety Message Example
Risk of electric shock.
• Prior to recycling the battery pack, protect exposed terminals with heavy
insulating tape to prevent shorting.
• Disconnect all test leads and turn diagnostic tools off before removing the
battery pack.
• Do not attempt to disassemble the battery or remove any component
projecting from or protecting the battery terminals.
• Do not expose the diagnostic tool or battery pack to rain, snow, or wet
conditions.
• Do not short circuit the battery terminals.
Electric shock can cause injury.
Important Safety Instructions
For a complete list of safety messages, refer to the accompanying Important Safety
Instructions manual.
SAVE THESE INSTRUCTIONS
To Next Page
Loading...
Need help?
General