SNBC BTP-P33 - Main Technical Specifications; Printer Specifications Table

BTP-P33 User’s Manual
- 2 -
2 Main technical specification
2.1 Technical specification
Item
Parameters
Printmethod
Thermal
Print resolution
203DPI×203DPI
Print speed
Label: Max.50mm/s
Receipt: Max.76mm/s
Note: Factory default value is 50mm/s
Print width
Max.72mm
Paper type
Sticky label paper, black marked paper, continuous paper
Paper width
Continuous paper: 44±0.5mm, 60±0.5mm, 80±0.5mm
Marked paper: 44±0.5mm, 60±0.5mm, 80±0.5mm
Label paper: 80±0.5mm
Note: To support different paper widths via installing
corresponding sensors at different positions. Default to
support 80mm.
Paper thickness
Label paper: 0.06-0.16mm;
Marked paper and continuous paper: 0.06-0.10mm
Barcode support
1D barcode: ESC/POS commands: UPC-A, UPC-E, JAN13
(EAN13), JAN 8 (EAN8), CODE39, ITF, CODABAR,
CODE93, CODE128
1D barcode (CPCL): UPC-A, UPC-E, JAN13 (EAN13),
JAN8(EAN8), CODE39, CODE93, Interleaved 2 of 5,
Interleaved 2 of 5 with checksum, CODE128, UCC EAN
128, CODABAR, MSI
2D barcode (ESC/POS): PDF417, QRCODE, MAXICODE,
GS1
2D barcode (CPCL): PDF417, QRCODE