SNBC BTP-P33 - User Manual

Need help?

Do you have a question about the SNBC BTP-P33 and is the answer not in the manual?

Summary

Warning and Caution

Safety Warnings

Highlights critical instructions to prevent body and equipment damage.

Operational Cautions

Provides important information and prompts for operating the printer safely.

General Safety Information

Safety Instructions

Crucial safety guidelines including warnings about the tear bar and hot print head.

General Cautions

Covers environmental factors, power, and battery handling for safe operation.

Introduction to the BTP-P33 Printer

Printer Outline and Use

Describes the BTP-P33 as a mobile receipt/label printer for indoor/outdoor use.

Key Features

Highlights design aspects like drop resistance, OLED screen, portability, connectivity, and OS compatibility.

Main Technical Specifications

Printer Specifications Table

Details print method, resolution, speed, width, paper types, thickness, and barcode support.

Paper Specifications

Paper Type and Continuous Paper Parameters

Defines paper types and specifications for continuous paper, including width and thickness.

Marked Paper Parameters

Specifies parameters for marked paper, including width, length, and reflectivity.

Label Paper Specifications

Label Paper Type Parameters

Details parameters for label paper, including width, length, gap, and thickness.

Print and Tear-off Position

Print Position Guidance

Explains print width and margin settings (L1, L2, L3, L4) for different paper widths.

Tear-off Position

Tear-off Mark Location

Illustrates the tear-off position relative to the print line and paper feeding direction.

Appearance and Components

Printer Component Identification

Identifies and lists the external components of the printer with numbered labels.

Button Functions Overview

Describes the functions of the Power and Set buttons for printer operation.

Installation Guide

Unpacking and Standard Contents

Instructions for checking packed items for standard configuration and optional accessories.

Installation Steps

Battery Installation

Guidance on inserting the battery correctly and safety precautions.

Interface Cable Connection

Instructions for connecting the charger or USB cable to the printer.

Paper Roll Installation

Loading the Paper Roll

Step-by-step instructions for opening the cover and loading the paper roll.

Self-Test and Dump Mode

Printing Self-Test Page

Procedure for printing a self-test page to verify printer functionality.

Entering Dump Mode

Instructions for entering and exiting hexadecimal dump mode for data inspection.

Routine Maintenance

Print Head and Platen Roller Cleaning

Procedure for cleaning the print head and platen roller using alcohol cotton balls.

Sensor Cleaning

Steps for cleaning paper end and mark sensors to ensure proper detection.

Interface and Connectivity

USB Interface Details

Explains USB 2.0 compatibility and provides pinout definitions for the Mini USB socket.

Troubleshooting Common Issues

Printer Not Working

Addresses issues where the LCD is off and the printer is unresponsive.

OLED Alarm Indicators

Explains common OLED display alarms like paper end, low power, or abnormal print head.

Printing Problems

Covers issues like paper jams, sudden stops, or printout quality problems.

Regulatory Information

FCC Compliance Statement

Details FCC rules, compliance conditions, and measures to correct interference.

RF Exposure Warning

States the device meets RF exposure requirements for portable use without restriction.

The BTP-P33 is a portable receipt and label printer designed for both indoor and outdoor mobile printing. It features a robust design with 1.5-meter anti-drop protection, ensuring durability in various working environments. The printer is compact, lightweight, and easy to operate, making it suitable for mobile applications.

Function Description:

The BTP-P33 primarily functions as a mobile thermal printer for receipts and labels. It supports various paper types, including sticky label paper, black-marked paper, and continuous paper. The printer offers flexible connectivity options, including USB and Bluetooth wireless communication, to meet diverse application requirements. It is compatible with mainstream mobile operating systems such as Windows/CE/Mobile/Android/iOS.

Important Technical Specifications:

Print Method: Thermal
Print Resolution: 203 DPI × 203 DPI
Print Speed:
- Label: Max. 50 mm/s
- Receipt: Max. 76 mm/s (Factory default: 50 mm/s)
Print Width: Max. 72 mm
Paper Types: Sticky label paper, black marked paper, continuous paper, external thermal paper roller.
Paper Roll OD: Max. 40 mm
Paper Roll ID: Min. 12.5 mm
Paper Widths Supported:
- Continuous paper: 44±0.5mm, 60±0.5mm, 80±0.5mm
- Marked paper: 44±0.5mm, 60±0.5mm, 80±0.5mm
- Label paper: 80±0.5mm
- Note: Different paper widths are supported by installing corresponding sensors at different positions. Default support is 80mm.
Paper Thickness:
- Label paper: 0.06-0.16mm
- Marked and continuous paper: 0.06-0.10mm
Barcode Support:
- 1D barcode (ESC/POS): UPC-A, UPC-E, JAN13 (EAN13), JAN 8 (EAN8), CODE39, ITF, CODABAR, CODE93, CODE128
- 1D barcode (CPCL): UPC-A, UPC-E, JAN13 (EAN13), JAN8(EAN8), CODE39, CODE93, Interleaved 2 of 5, Interleaved 2 of 5 with checksum, CODE128, UCC EAN 128, CODABAR, MSI
- 2D barcode (ESC/POS): PDF417, QRCODE, MAXICODE, GS1
- 2D barcode (CPCL): PDF417, QRCODE
Character Support:
- ESC/POS: Built-in standard ASCII (9X17, 12X24), user-defined characters, standard Chinese (24 × 24) simplified Chinese (2312), English (ASCII). Optional configuration for simplified Chinese (18030 or GBK), traditional Chinese, US, Britain, Japan, Korea. Users can download fonts to FLASH or RAM.
- CPCL: 8×16, 16×16, 20×12, 12×24, 24×24, 28×27, 34×48, 42×46, 48×47, 74×45, support simplified Chinese GB18030/BIG5.
Character Handling: All characters can be enlarged 1-6 times horizontally and vertically. Supports rotation printing in four directions (0°, 90°, 180°, 270°).
Paper Detection: Photoelectric sensors for paper end and label paper position.
Top Cover Position Detection: Micro switch.
Print Head Temperature Detection: Thermistor.
Graphic Handling: Bitmap downloading (max. 255 FLASH bitmaps or 8 RAM bitmaps; download buffer size: 64 KB FLASH bitmap, 128k RAM bitmap). Supports direct bitmap printing and fast graphics printing.
Communication Interface: Bluetooth, USB interface.
Cash Drawer Interface: None.
Memory: RAM: 8MB, FLASH: 4MB/8MB (option).
Power Adapter: Input: AC100-240VAC/50~60Hz; Output: 12V±0.6V DC, 1A.
Print Head Life: ≥50Km (standard test conditions).
Working Temperature and Humidity: -10 ~ 50 ℃, 10 ~ 90% humidity (non-condensation).
Storage Temperature and Humidity: -20 ~ 60 ℃, 10 ~ 90% humidity (non-condensation).
Overall Size: 109(L)×105(W)×51(H)mm.

Usage Features:

OLED Display Screen: Provides visual key operation for ease of use.
Paper Roll Installation: The printer features a top cover that opens for easy paper roll installation. Paper guides can be adjusted to accommodate different paper widths (44mm, 60mm, 80mm).
Self-Test Page: Users can print a self-test page by installing paper, pressing the FEED button, and then the power button.
Dump Mode: After printing a self-test page, pressing the FEED button for 1 second enters Dump mode, where transmitted data and corresponding ASCII characters are printed. This mode can be exited by turning off the power and restarting, or by pressing the FEED button three times.
Buttons:
- Power Button: Long press to turn on/off the printer; short press to wake from sleep mode.
- Set Button: In standby, press to enter configuration mode; in configuration mode, press to switch items; in sleep mode, press to wake.
- FEED Button: Short press for a small paper feed; long press for a long paper feed or positioning; in configuration mode, press to change configuration; in sleep mode, press to wake.
Paper Guide: Essential for adjusting print width, with three slots for 80±0.5mm, 60±0.5mm, and 44±0.5mm paper widths.
Low Temperature Operation: Can operate in environments as low as -10°C.

Maintenance Features:

Routine Maintenance: It is recommended to perform maintenance at least once a month.
Safety Precautions: Before maintenance, ensure the battery is removed. Avoid using organic solvents like gasoline or acetone. Do not power on the printer when cleaning sensors until alcohol has completely evaporated.
Cleaning Print Head and Platen Roller:
1. Remove the battery and open the top cover.
2. Allow the print head to cool down if recently used.
3. Wipe dust and stains from the print head and platen roller with a wrung-out alcohol cotton ball.
4. Close the top cover after the alcohol evaporates.
Cleaning Sensor:
1. Remove the battery.
2. Open the top cover.
3. Wipe dust and stains from the sensor surface with a soft, wrung-out alcohol cotton cloth.
4. Close the top cover after the alcohol evaporates.
Troubleshooting: The manual provides solutions for common issues such as the printer not working (e.g., no battery power, loose battery connection, circuit board damage), OLED alarms (e.g., paper end, open paper cabinet, low power, print head abnormal, wrong paper type), and printing problems (e.g., paper jam, paper end, unclear printout, missing content).