Need help?Do you have a question about the SNBC BTP-M300 and is the answer not in the manual?
Contains declaration, copyright, trademark, and contact information.
Essential safety and operational guidelines for performing maintenance procedures.
General description of the BTP-M300 printer's capabilities and applications.
Detailed technical parameters of the printer, including dimensions and interface capabilities.
Overview of printer components and a block diagram of the main control board.
Detailed specifications for USB, Serial, Parallel, and Ethernet interfaces on the main board.
Step-by-step instructions for disassembling and reassembling printer components.
Detailed guide on replacing key printer components like the print head and motors.
Instructions for adjusting print spacing and tightening the transmission belt.
Guide to identifying and resolving common error types and operational problems.
Reference for printer commands, EEPROM settings, and dump modes.
Lists spare parts, exploded drawings, and outline dimensions.
Provides main control board layout and guidelines for printer lubrication.
General| Resolution | 203 DPI |
|---|---|
| Paper Type | Thermal Paper |
| Print Method | Direct Thermal |
| Interface | USB, Serial, Ethernet |
| Supported Barcode Types | UPC-A, UPC-E, EAN-13, EAN-8, Code 39, Code 93, Code 128 |
| Supported Media Types | Roll paper |
| Operating Humidity | 20% to 80% RH (non-condensing) |
| Storage Humidity | 10% ~ 90% RH |
To Next Page
