UPS/NTA GB/DELMP_EXPC1C3C6_B 27
3.7.9 Unit switching on or coupling to the common busbar
Conditions to be completed:
- the system is live upstream of the UPS unit
- wait for the control panel to light up.
In the control panel of the appropriate unit, successively select:
- the menu "UPS UNIT"
- the menu "UNIT COMMANDS"
- and the submenu "AUTOMATIC STARTUP".
The automatic startup is run through an interactive procedure. Just follow the instructions
displayed and validate with the "ENTER" key.
Note: at the end of the start up sequence, the unit is coupled to the common busbar and
Q3 is closed.
To Next Page
Loading...
Need help?
General