4 Internal measuring point
Operating mode Query or selection off or on
With off the internal measuring point is deactivated with on measuring point 01 is
active.
Factory setting: on
4.5 Setting mode – Communication settings
In the setting mode under Communication you will find the following query and setting options
1 Alibi memory
Memory capacity Query
Memory size 4.000.000 = 100%
(Display only with integrated and activated alibi memory)
Memory used Query
of the currently occupied filling level incl. percentage display (e.g. 162 = 0%)
Find (single input) Search
Single entry via input consecutive number
Find function Search
Multiple entries by entering oldest and youngest consecutive number
Search (additional field) Search
Single entry via input contents additional field
Assignment of additional
data
Selection
> None
> Barcode
> Org data A
> Org data B
> Org data C
> Org data D
> Date/Time
> Price labelling (special software)
2
Interface 1 RS232 (internal)
(Further details see also interface description 470.508.090)
Usage of serial interface Selection
> none
> 2795.14
> 2795.12+2795.20
> Data processing
> EDP 2 (unidirectional)
> Barcode
> Second / large display
> Digital scale
If the device is already used via another interface output, this selection position is
displayed with disabled.
Factory setting: 2795.14
To Next Page
Loading...
