Soehnle 3025 - SD Card Data Backup and Restore Operations

56
5.16 SD - card data backup
On the optional Micro SD card (Alibi memory) it is possible to save the setting parameters,
to reset the data and functions at the terminal at a later time.
Contents for data backup
All setting parameters (user) and the program selection of the terminal are saved.
The scale/adjustment parameters (ECAL) of the measuring points and the printouts are not saved.
Settings for data backup
In the Setting mode / Terminal / SD card data backup there are the following functions or selections.
> Import
> Export
> Export for automatic import
After the personal settings have been made, one of the two export functions must be executed so that the
Import function can be executed later.
Import
In the SD card data backup menu, the current user settings from the micro SD card are reloaded into the
terminal by accepting F6 Continue. The security question Import with the function keys F1 to F3 YES the data
transfer from the micro SD card to the terminal is executed, with the function keys F4 to F6 NO no data
transfer from the micro SD card to the terminal takes place.
Export
In the SD card data backup menu with the selection Export, the current user settings are saved from the
terminal to the SD micro card by the transfer F6 Next.
This data backup is only for the manual import function.
Export for automatic import
In the SD card data backup menu with the selection Export for automatic import, the current user settings are
saved on the micro SD card and in the event of a software problem, the setting parameters are automatically
reloaded.
This data backup is for the automatic or manual import function.