6.6.3 Display information field
In the Setting Mode / Program Settings / Totalising + Picking / Display Information field can be used to set
which data is displayed in the information field.
The following options are available:
> Factory default: Switch between the individual functions used, e.g. sum memory, organizational data
memory and switching functions for outputs and inputs.
> Total: Continuous display of the totalising memory.
> Last item: Continuous display of the last item.
> IO control: Continuous display of output and input states.
> ORG data + database: Continuous display of the organizational data memory.
> Fixed tare values: Continuous display of the activated fixed tare value memory.
> Show barcode content: Continuous display of the scanned barcode.
> Code128 Weight value: Display bar code128 with the current stability weight value.
Example Setting Display information field on last item:
6.6.4 Tare function
For a description and detailed instructions of the tare function, refer to chapter 6.5 on page 59.
To Next Page
Loading...
