Soehnle 3025 - Weighing and Taring Settings in Setting Mode

67
6.5.16 Settings in the Setting Mode
You can use the parameters in the setting mode to adapt the weighing and taring application program to your
individual requirements.
To enter the setting mode, press F6 Setting mode in the Setting functions level and then press F6 Apply to
call up the program settings.
F6 Next calls up the program settings for the selected application program.
1 Weighing and taring
Fixed tare values Editing fixed tare values
Selection of existing fixed values from the list
Scroll with the arrow keys F3 and F4.
Call the desired fixed value with F6 Edit.
Edit an existing fixed value from the list.
Press F6 to call up editing of the selected fixed value.
Parameter Name is marked, call via F6 Edit,
Input via keyboard. Accept the input with F6.
(Cancel without accepting the entry with F5 Cancel).
Further parameters can be edited in the same way.
Deleting an existing fixed value
Scroll with the arrow keys F3 and F4.
Delete the marked fixed value with F2 Delete.
The resulting gap in the consecutive numbering is closed.
Save new fixed value
Press F1 New.
The memory location number is assigned by the device. The first number in
brackets indicates the number of free memory locations, the second number the
memory locations occupied by fixed values.
Parameter Name is highlighted, call via F6 Edit,
Input via keyboard.
Accept the input with F6 Accept.
(Cancel without accepting the entry with F5 Cancel).
Further parameters can be edited in the same way.
Exiting the list Fixed values
Press the F5 Back key to exit the list.
Clear fix tare values Selection Do not execute or Execute
Execute deletes all fixed tare values
ORG A delete fixed values Selection Do Not Execute or Execute
Execute deletes all ORG A fixed values
ORG B delete fixed values Selection Do Not Execute or Execute
Execute deletes all ORG B fixed values
ORG C delete fixed values Selection Do Not Execute or Execute
Execute deletes all ORG C fixed values
ORG D delete fixed values Selection Do Not Execute or Execute
Execute deletes all ORG D fixed values