Soehnle 3025 - Counting; Function Keys for Counting Operations

79
6.7 Counting
Counting of parts of the same weight.
The individual part weight (reference weight) is determined from a known small quantity of counted parts.
This is then used as a divisor to determine the number of pieces from the weight of an unknown quantity of
these counted parts.
6.7.1 Function keys
The function keys F1 to F6 are available for controlling the functions. These are assigned in 4 levels, the
change through the levels takes place via the function change key.
1. Level Counting functions:
Ref
10
Ref
Variab
Ref
Weight
Total Clear Plus
F 1 F 2 F 3 F 4 F 5 F 6
2. Level Control functions:
Ref
Stat
Ref
fix
F 1 F 2 F 3 F 4 F 5 F 6
3. Level Tare functions:
Tare
fixed
Add
tare
Prov.
tare
Multi
tare
Accept
fixed
F 1 F 2 F 3 F 4 F 5 F 6
4. Level Setting functions:
Gross x10
Auxiliary
display
Prog-
ram
Setting
mode
F 1 F 2 F 3 F 4 F 5 F 6