1. GENERAL INFORMATION
1.1 Purpose of use
The Soehnle Professional Terminal 3025 is a calibratable terminal for use in scales and weighing systems
with standard DMS weighing and load sensors. Up to two analogue measuring points (scales) can be
connected internally at the same time. Another scale can be connected via the serial interface, e.g. as a
reference scale. Additional data can be entered via the keyboard. Various interface options are available for
connecting printers, EDP systems, readers, data storage devices and an external PC keyboard.
The Soehnle Professional Terminal 3025 is designed to work effectively in harsh environments. It is robust,
easy to clean, flexible and fast. Its logical structure and user guidance allow quick familiarisation and
intuitive work at the terminal. Its design adapts to your individual requirements and supports you in your task.
1.2 Safety instructions
Before operating the terminal, please read the information listed in the operating instructions carefully. They
contain important information for the installation, intended use and maintenance of the terminal.
The manufacturer is not liable if the following instructions are not observed:
If electrical components are used under increased safety requirements, the relevant regulations must be
observed. Never service the terminal while it is live. The warranty does not apply in the event of improper
installation.
> The Terminal 3025 must not be used in hazardous or explosion-endangered areas.
> The permissible mains voltage is 100 - 240 volts.
The socket must be earthed and easily accessible.
> The terminal may only be opened by trained Soehnle Industrial Solutions service technicians.
There are no user serviceable parts in the housing. In case of external intervention your warranty
claim expires.
> Repairs and the replacement or installation of parts may only be carried out by a trained
Soehnle Industrial Solutions Service Center.
> If the power cord is damaged, the terminal must not be operated. Interrupt the power supply and
call a Soehnle Industrial Solutions service center.
> If the terminal is used in custody transfer applications, the do not damage the attached safety
markers.
Contact your Soehnle Industrial Solutions service partner if you have any problems.
1.3 Cleaning
A damp cloth and commercially available cleaning agents are sufficient for cleaning.
Do not use abrasive or corrosive agents.
To Next Page
Loading...
