Soehnle 3025 - Page 34

34
8
Data processing settings
(Further details see also interface description 470.508.090)
EDP with STX-ETX Selection
off or on
Factory setting: off
Factory settings Selection
Do not execute: Individual EDP settings are retained
Execute: Resets EDP settings to factory settings
9 Barcode (further details see also manual 3025 Chapter 7.9)
Decimal separator numerical Selection off or on
Factory setting: on
Show barcode timer Input
Time display barcode numeric via numeric keypad
Factory setting: 2500 ms
Selection filtering number Input
Filter number numeric via numeric keypad
Factory setting: 1
Control character filter no. 01 Input
Code Control character numeric via numeric keypad
Factory setting: 0
First position filter no. 01 Input
Start filter position numeric via numeric keypad
Factory setting: 1
Last position filter no. 01 Input
End of filter position numeric via numeric keypad
Factory setting: 70
Multiscan number Input
of the number of multiple scans from 0 to 4 using the numeric keypad
Factory setting: 0
Code 1.Scan (ORGA) Input
control commands from interface description 3025 (Document 470.508.090D)
Factory setting: 0
Code 2.Scan (ORGB) Input
control commands from interface description 3025 (Document 470.508.090D)
Factory setting: 0
Code 3.Scan (ORGC) Input
control commands from interface description 3025 (Document 470.508.090D)
Factory setting: 0
Code 4.Scan (ORGD) Input
control commands from interface description 3025 (Document 470.508.090D)
Factory setting: 0