4
4mm Allen Key
Turn the screw to connect rear panel
with inverter
5
Crimping tools Used to crimp power cables
6
Multi-meter Used to check grounding
7
Marker pen Used to mark signs
8
Measuring tape Used to measure distances
9
Level
Used to ensure that the rear panel is
properly installed
10
ESD gloves Operators wear
11
Safety goggles Operators wear
12
Anti-dust respirator Operators wear
3.5 Installation Position
ME3000SP should be vertically mounted (to ensure fast heat dissipation), please choose a position without direct
sunlight / snow accumulation to install ME3000SP.
To Next Page
Loading...
