Sofar ME3000SP - Installation Environment Requirements; Required Installation Tools

9
Communication cable × 1
Fig. 3 Accessories of ME3000SP
3.3 Installation Environment
 Choose a dry, clean, and tidy place, convenient for installation
 Ambient temperature range: -25C ~ 60C
 Relative humidity: 0 ~ 100% (non-condensed)
 ME3000SP shall be installed in a well-ventilated place
 No flammable or explosive materials close to ME3000SP
 ME3000SP shall be connected to the electrical grid with an overvoltage category III or category II
 Maximum altitude: 2000m
3.4 Installation Tools
The following tools shall be prepared before installation:
No. Tool Model Function
1
Hammer drill
Recommend drill dia.6mm
Used to drill holes on the wall
2 Screwdriver wiring
3 Wire stripper Strip wire