⚫ The energy storage system must be equipped with protective measures such as fences and
walls, and safety warning signs must be erected for isolation, so as to avoid the entry of unauthorized
personnel during the operation of the equipment, which may lead to personal injury or property
damage.
1.2.2 Battery Safety
⚫ Do not expose the battery to high temperature environments or around heat-generating
equipment, such as high temperature sunlight, sources of ignition, transformers, heaters, etc.
Overheating of the battery may cause leakage, smoke, release of flammable gases, thermal
runaway, fire or explosion.
⚫ It is strictly prohibited to disassemble, modify or damage the battery (e.g. inserting foreign
objects, extruding with external force, immersing in water or other liquids), which may cause
battery leakage, smoke, release of flammable gases, thermal runaway, fire or explosion.
⚫ It is strictly prohibited to subject the battery to mechanical vibration, dropping, collision,
piercing by hard objects and pressure shock, or it may lead to battery damage or fire.
⚫ It is strictly prohibited for the battery terminals to come into contact with other metal objects,
which may cause heat generation or electrolyte leakage.
For safe use of the product, the technician should carefully read and strictly observe the safety
requirements. The Company shall not be liable for product functional abnormality, component
damage, personal safety accident, property loss, or other damage caused by the following reasons:
⚫ The batteries are not charged as required, resulting in capacity loss or irreversible damage to
the batteries.
⚫ A battery is damaged, falls, or leaks due to improper operations or failure to operate the
battery as required.
⚫ The batteries are not powered on in time, which causes damage to the batteries due to over
discharge.
To Next Page
Loading...