5.1.4 Antistatic requirements
The static electricity generated by the human body may damage the electrostatic sensitive
components on boards, such as the large-scale integrated circuit (LSI).
● When touching the equipment, before holding a single board, a module with exposed circuit
boards, or a dedicated integrated circuit (ASIC) chip, etc., please observe the static protection
specification, and wear anti-static overalls, anti-static gloves or wristbands, and the other end of the
anti-static wristbands should be well grounded.
● When holding a board or a module with an exposed circuit board, hold the edge of the board
or module without components. Do not touch the components with your hands.
● The removed boards or modules must be packaged in anti-static wrapping material before
storage or transport.
5.2 Wiring preparation
5.2.1 Preparation of installation tools
To Next Page
Loading...