PowerMagic 400V C&I Energy Storage System User Manual
⚫ It is prohibited to contact the power supply equipment directly, with other conductors or
indirectly through wet objects, and the voltage at the point of contact should be measured before
contacting any conductor surface or terminal to confirm that there is no danger of electric shock.
⚫ When the unit is in operation, the housing is hot and there is a risk of burns, so do not touch
it.
⚫ Do not allow fingers, parts, screws, tools or veneers to touch the running fan to avoid injury
to hands or damage to the unit.
⚫ In the event of a fire, evacuate the building or equipment area and ring the fire alarm or call
the fire alarm. Under no circumstances should you re-enter a burning building or equipment area.
1.2 Equipment Safety
1.2.1 Energy storage system safety
⚫ Avoid standing at the cabinet door (including within the opening range of the door) when the
energy storage system is malfunctioning.
⚫ It is forbidden to open the cabinet door when the system is running.
⚫ The layout of the energy storage system installation must meet fire distance or fire wall
requirements as specified by local standards, including but not limited to 《GB 51048-2014 Design
Code for Electrochemical Energy Storage Station》、《NFPA 855 Standard for the Installation of
Stationary Energy Storage Systems》specification requirements.
⚫ When inspecting the system with electricity, pay attention to the hazard warning signs on the
equipment and avoid standing at the cabinet door.
⚫ After the power components of the energy storage system are replaced or the wiring is
changed, it is necessary to manually start the wiring detection to avoid abnormal system operation.
⚫ It is recommended that users provide their own camera devices to record the detailed process
of installation, operation and maintenance of the equipment.
To Next Page
Loading...