PowerMagic 400V C&I Energy Storage System User Manual
6 Powering up and shutdown operation specificat-
ions
⚫ The BESS can only be put into operation after confirmation by a professional and approved
by the local power department.
⚫ For BESS with a long shutdown time, check the equipment thoroughly and carefully to
ensure all indexes are acceptable before powering it on.
6.1 Indicator lights and status descriptions
Table 6.1 SOFAR LOGO indicator status information
Running (AC/DC relay fully
closed)
Red flashing (2Hz) + Buzzer
(fire-activated faults,
not faults in the FFS
itself)
Table 6.2 PCS indicator status information
Leakage current, DC
side reverse
connection, bus over-
undervoltage
To Next Page
Loading...