EasyManua.ls Logo

Sofar PowerMagic - Storage Requirements

Default Icon
114 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PowerMagic 400V C&I Energy Storage System User Manual
27
Figure 3.2 Forklift side transport
3.2 Storage requirements
Storage environment requirements:
Recommended storage temperature: 20℃30℃;
Relative humidity: 5%RH80%RH;
Dry, ventilated and clean;
Avoid contact with corrosive organic solvents, gases and other substances;
The distance from the heat source should not be less than two meters;
Instruction
Before storage, the energy storage system systems should be checked and data recorded.
Ensure that the cabinet door and the cabinet door of each device inside are locked and the
power switch is in a safe state.
During storage, it is necessary to provide relevant proof of compliance with product storage
requirements, such as temperature and humidity log data, storage environment photos and
inspection reports.
The energy storage system and transport time is not more than 6 months in total (counting
time from the start of shipment), should be used in a timely manner, lithium long-term storage
will exist capacity loss.

Table of Contents